Legs and Clamps
Standard Leg with Adjustable Feet
Standard Leg with Adjustable Feet
A standard stage leg is manufactured with 1 1/4" Schedule 40 aluminum pipe and a 2 1/8" adjustable screw foot. The screw foot has a neoprene non-marring surface that will not scratch your floor. The legs are cut to your specific stage height, and the adjustable screw foot gives you an additional 2" adjustment for fine leveling on uneven surfaces.
Adjustable Legs
Click image for enlargement
Click image for enlargement
An adjustable leg uses the same concept as the standard leg with regard to installation but offers multiple heights with one set of legs. The adjustable legis manufactured with 1 1/4" Schedule 40 aluminum pipe that is inserted into a square galvanized Telespar tube with holes every two inches and are fitted with the same adjustable screw foot as the standard legs. Adjustable legs are offered in the following height ranges:
- 16 to 24 inches
- 24 to 36 inches
- 36 to 48 inches
Leg Clamps
This is a close-up view of
2-leg and 4-leg leg clamps
There are two types of leg clamps used in the installation of a stage or riser system, a 2-leg clamp and a 4-leg clamp. We recommend the use of leg clamps for added stability on any stage that is set at a height of 24" or higher.