Bases

Slip-Fit and Screw-Fit Bases

 

With the Slip-Fit system, a special nipple is attached to the slip base. The Slip-Fit upright slides quickly and easily over the nipple. The base is punched with up to three holes so the nipple can be positioned in the center of the base or at any edge. The 11” and 15” bases also have a stacking slot, allowing the bases to be stagger stacked for easier storage.

The Screw-Fit system utilizes a threaded nipple riveted into the bottom of the screw in the upright that threads into the Screw-Fit base. The Screw-Fit base was designed with two extruded holes, one in the center of the base and another at the edge. The hole at the edge is useful when uprights are placed next to a wall. Extruded holes guide the upright into the base easily, without cross-threading. Screw-in nipples are attached to the uprights with four steel rivets and are designed to be replaced with simple hand-tools.

Note: The main advantage of the Screw-Fit system is the ability to stack the bases, which requires less storage space.

Replacement parts for all pipe and drape components are available in the event of damage or loss.

Slip-Fit Bases
Item #
Specifications
Weight

SDB506

- 8" x 14" Slip-Fit Base
- For Uprights 3' and Over
- Includes a 3" Nipple

6.5 lbs

SDB505

- 15" x 15" Slip-Fit Base
- For Uprights 5' and Over
- Includes a 3" Nipple

11.2 lbs

SDB504

- 24" x 24" Slip-Fit Base
- For Uprights 10' and Over
- Includes a 6" Nipple

29.0 lbs

 

Screw-Fit Bases
Item #
Specifications
Weight

SDB503

- 11" x 11" Slip-Fit Base
- For Uprights 3' and Over

6.0 lbs

SDB502

- 15" x 15" Slip-Fit Base
- For Uprights 5' and Over

10.5 lbs

SDB501

- 24" x 24" Slip-Fit Base
- For Uprights 10' and Over

29.0 lbs